Dry-type strong magnetic disc [url = http://www.findxk.com] separator [/ url] is widely used in the separation of weakly magnetic minerals and precious metals in ores of less than 2-3 mm selected It has a single disk (diameter φ = 900 mm), double-disc (φ = 576 mm) and three (φ = 600 mm) three. 

 The magnetic field strength up to 880-1440 kA / m, of which more φ576 mm dual disc applications, so be it, for example. 

 Red Star machine technician, said that the main part of the separator is a "mountain" shaped electromagnet and rotatable suspension induction disc, the disc like a turn buckle the plate with sharp teeth, the diameter ratio sophomore sub-ore belt width of about one disc Worm reducer drive, through the hand wheel to adjust the spacing between the disc and the electromagnet (adjustment range 0-20) mm. 

 A weak magnetic field pole in order to prevent clogging, built to mine cylinder, pre-discharge to the compound of the strong magnetic minerals, and its working principle and the separation process: the ore from the pre-discharge of a strong magnetic mineral ore cylinder was evenly routed to the disk following the magnetic field gap, and then sent by the belt on the belt to the mine, weakly magnetic minerals by magnetic force, disc sucked sharp teeth, and with the disk rotation with a belt on both sides of this Department due to a sharp decline in magnetic field strength, in the role of gravity and centrifugal force, behind the magnetic belt on both sides of the trough (usually concentrate); non-magnetic tailings transported by the belt to the side discharged into the trough of non-magnetic products (usually for the tailings). 
 Articles from the Red Star mill network http://www.findxk.com (please specify the source) 
 Shaker www.findxk.com / yc.htm 
 Grader www.findxk.com / fjj.htm 
 Cement mill www.findxk.com/pro68.htm 
 Lattice mill www.findxk.com/pro65.htm